5axis aerospace automotive energy and medical

Update time : 2023-06-29 09:27:03

Fully automated linking moves with optimized rotary solutions for 3+2- and 5-axis rapid positioning
5-axis feed rate optimization significantly improves surface quality and extends tool life
Channel roughing and finishing: A 5-axis milling operation to remove material inside a channel bounded by two walls. Especially valuable for thin walled parts, this toolpath combines optimal contact between cutting tool and channel walls to efficiently remove material while also minimizing pressure on the walls
Composite milling: An extremely versatile set of 36 machining cycles, based upon six machining patterns and six tool-axis strategies, for creating a wide variety of 4- and 5-axis roughing and finishing toolpaths
Contour machining: Produces a 4- or 5-axis milling operation to machine along one or more 3D profiles while keeping the tool normal to the surface. Also used to chamfer edges of the workpiece
Impeller cutting: Impeller creates a 5-axis milling operation to rough, re-rough, or finish the channel between the blades of an impeller, with or without a splitter blade
Port roughing and finishing: Using a spline curve to guide the tool axis, this cycle follows a helical spiraling pattern to rough, finish, or machine an area that is accessed through a restricted opening
Spiral milling: Spiral roughing creates a 4-axis milling operation that spirals continuously along a set of surfaces and around a reference axis. It is a high-productivity cycle, suitable for hard materials and capable of a high chip removal rate. Spiral finishing is a 5-axis milling operation that spirals continuously between a start profile and end profile along a set of surfaces, ideal for single-blade finishing
Swarf cutting: Used to machine tilted walls using the flank of the cutting tool with simultaneous 4- or 5-axis toolpath
Z-level roughing: Using 3-, 4-, or 5-axes to rough machine a workpiece while maintaining constant loads on the cutters for smooth, high-speed toolpath
Z-level finishing: A 3-, 4-, or 5-axis finishing operation to cut vertical and near-vertical walls at incremental Z-levels and to cut floors with complex freeform shapes

Previous : One Precision 3d printing molds by SLA SLS

Next : ONE PRECISION CNC MACHINING PC KEYBOARDS

CNC Milling vs. CNC Turning: Which Machining Process Do You Need?

Sep .03.2026

CNC milling is a process where a stationary workpiece is held on a machine bed while multi-point cutting tools rotate at high speeds to remove material. The cutting tool moves along multiple axes (typically 3, 4, or 5 axes) to create complex geometries, holes, slots, and contoured surfaces.

One Precision 3d printing molds by SLA SLS

Jul .12.2023

High precision CNC machining service ABS POM PP plastic SLA/SLS 3D printing services rapid prototype plastic injection mold

ONE PRECISION CNC MACHINING PC KEYBOARDS

May .10.2023

Cnc machining transparent PC gaming keyboard with sandblasted, also we offer dyed PC as well.

Definition of Physical Vapor Deposition (PVD)

Apr .25.2023

PVD (physical vapor deposition) coating, also known as thin-film coating, is a process in which a solid material is vaporized in a vacuum and deposited onto the surface of a part. These coatings are not simply metal layers though.

Language

Language

5axis aerospace automotive energy and medical